The PRO TRAXION progress capture pulley is designed to allow rope installation while the pulley is connected to the anchor. With its large diameter sheave and great efficiency, it is particularly appropriate for hauling heavy loads. The side plate locks when loaded and prevents opening of the pulley during use. The lower connection point can be used to create different types of hauling systems. Description: Loss-resistant pulley:- allows a rope to be installed when the pulley is connected to the anchor Well suited for hauling heavy loads:- large diameter aluminium sheave mounted on sealed ball bearings for excellent efficiency- side plate locks when loaded and prevents opening of the pulley during use Versatile:- lower connection point for creating different types of hauling systems- toothed cam with self-cleaning slot optimises performance under any conditions: frozen or dirty ropes...- may be used as simple pulley by locking the cam in the raised position Specifications: Weight: 265 g Certification(s): CE EN 567 Material(s): aluminium, stainless steel, nylon Min. rope diameter: 8 mm Max. rope diameter: 13 mm Sheave type: sealed ball bearings Sheave diameter: 38 mm Working load: 2 x 2,5 = 5 kN Breaking strength: 2 x 11 = 22 kN Working load as progress capture pulley: 2,5 kN Breaking strength as progress capture pulley: 4 kN Efficiency: 95 %

The Omni-Block combines a swivel and pulley into one tool, and incorporates a unique side plate that opens while the pulley is still attached to the anchor. Part #: P51Rope Size: 13mmWeight: 260gmMBS: 36kNWLL: 8kNCertification: CE

The Rock Exotica Prusik Minding Pulley (PMP) is the original, time-tested workhorse for lifting, hauling and tensioning in heavy load environments. Both the single and the double versions of the PMP boast an impressive 44kN MBS and are certified by UL to the NFPA 1983 "G" standard. True to Rock Exotica's high standard of design and production capability, the side plates of the PMP are milled in strategic areas to reduce weight while maintaining strength. The PMP utilises 2" sheaves with high efficiency bearings to get the most out of each pull. 2" Sheaves for hauling efficiency Classic PMP design, proven over decades of use Extraneous material is milled from side plates to remove weight Uses sealed, high efficiency ball bearings